Setup
StopWatt installation guide
Installation takes under a minute per unit. There is no wiring, no electrician and no configuration.
- 60-day money backTest it for a full billing cycle
- Free worldwide shippingShips in 1–2 business days
- Secure checkoutEncrypted card processing
- Human supportReal people, real replies
Quick answer
No. StopWatt is plug-in only and requires no changes to your wiring or panel.
Before you start
- Confirm your outlets are standard grounded household outlets (90V–250V).
- Unbox and inspect each unit for shipping damage.
- Decide placement using the room map below.
Installation steps
- 1. Plug the unit directly into a wall outlet — never a power strip, surge bar or extension cord.
- 2. Wait for the indicator light to illuminate, confirming the unit is powered.
- 3. Leave the unit plugged in continuously.
- 4. Repeat for each unit in your bundle, spacing them across floors and circuits.
Recommended placement by home size
| Home size | Units | Suggested placement |
|---|---|---|
| Under 1,200 sq ft | 1 | Central outlet, ideally near the kitchen or HVAC circuit |
| 1,200–1,500 sq ft | 2 | One per floor, one near the largest motor load |
| 1,500+ sq ft | 3 | One per floor plus one near the panel, garage or utility room |
Safety rules
- Keep the unit dry and away from heat sources.
- Do not open, modify or immerse the device.
- Unplug before cleaning and wipe with a dry cloth only.
- Discontinue use if the housing is cracked or the unit becomes hot, and contact support.
60-Day Money-Back Guarantee
Test StopWatt for a full billing cycle. Return it within 60 days of delivery for a refund of the purchase price.
Issued by the official StopWatt store · Refund of the purchase price
Frequently asked questions
Do I need an electrician?
What does the indicator light mean?
Can I move the units around?
Keep reading on the official StopWatt site
- StopWatt complaints, addressed
- 60-day guarantee and warranty
- Shipping and returns
- StopWatt and Consumer Reports
- StopWatt side effects and safety
Ready to order? Buy StopWatt direct or compare StopWatt bundle pricing.
Order direct from the official store
Ready to try StopWatt risk-free?
Pick the bundle that matches your home size, then complete your order securely on this page — no redirects, no account required.
Sizing rule of thumb: one device per 800–1,200 sq ft, so most homes over 1,500 sq ft use the 3-device bundle.
Checkout — 3 Devices
$105.84
- Charged onceOne-time payment, no subscription
- Dispatch1–2 business days, tracked
- 60 daysReturn for a refund, no questions
- Real supportsupport@getstopwatt.net
Prices in USD. The bundle price shown is the full discount — there is no code to hunt for. Add-ons available only here: add 1 extra stopwatt and 3-year replacement protection.